We answer technical queries every day and provide information to help our customers find solutions to technical problems. We want to make all of this information available to everyone, so we’re pulling all together here (articles, technical specs, FAQs and Q&A sessions). This is a work in progress.
Steven 
George 
Gary 
Jack 
Edd 
Alex 
Paul 
Shop 
Are any of your Mocal or Setrab oil coolers suitable for fuel cooling?
Yes all Mocal and Setrab coolers are suitable for fuel. The mocal coolers are some times used to ...
Read more Archived in: Mocal Oil Pump | VDO oil pump
The maximum working angle for this GKN joint when using the fastboot MS6J002 on this joint will b...
Read more Archived in: Suspension joints
If you ring the Circuit Office 01249 782101 they can tell you the days that the noise scrutineer ...
Read more Archived in: Exhaust packing
We do not have a listing for oil coolers for specific cars, but we do have a Setrab 9 Series cool...
Read more Archived in: Mocal oil thermostat
We keep in stock the Numax 3 stage charger, 10 Amp 1 Volt.
Read more Archived in: Extreme Racing Battery | Battery charger
On an ITG JC40 sausage filter is the inside fully meshed or just sponge?
All the ITG JC20, JC30, JC40 and JC50 sausage filters have an internal wire mesh support.
Read more Archived in: ITG
The Facet Posiflow pump 60106 would be suitable.
Read more Archived in: fuel pumps
Can you tell me the fluid capacity of the Setrab Oil Cooler 330mm 19 Row.
The capacity of the 330mm 19 row Setrab oil cooler is 0.4 litre.
Read more Archived in: Oil cooler
You should not use PTFE tape. The Mocal 90 degree union should be a metal to metal contact to the...
Read more Archived in: oil unions
This AVO suspension kit will fit the existing top mount on the Rover MG ZR.
Read more Archived in: Shockabsorbers
Asegure las compras
