Got some of your Goodridge Hardline in the car for fuelling, but where I've routed it to the engine bay, I'll need a 90 degree fitting for bonnet clearance. The fitting needs to then attach to an 8mm internal diameter fuel hose. Would this fitting be the correct one?
That would work, but depending on the fitting for the push on hose you may want to use a 90 Goodridge hard line bulkhead union. On the male end of the union you could use a straight -6JIC to 8mm push on union. Possibly cheaper to use a straight Goodridge hard line bulkhead union and a 90 degree push on union.
Archived in: Goodridge hard line fuel pipe28th August 2014
Asegure las compras
